1.25" dia copper round bar weighs 4.757 lb per ft (7.08 kg per m). Weight = cross-section area x length x 0.323 lb per cubic inch.
How much does copper round bar weigh per foot?
| Size | Area (sq in) | lb per ft | kg per m | 12 ft length, lb |
|---|---|---|---|---|
| 0.25" dia | 0.0491 | 0.190 | 0.28 | 2.3 |
| 0.375" dia | 0.1104 | 0.428 | 0.64 | 5.1 |
| 0.5" dia | 0.1963 | 0.761 | 1.13 | 9.1 |
| 0.625" dia | 0.3068 | 1.189 | 1.77 | 14.3 |
| 0.75" dia | 0.4418 | 1.712 | 2.55 | 20.5 |
| 1" dia | 0.7854 | 3.044 | 4.53 | 36.5 |
| 1.25" dia | 1.2272 | 4.757 | 7.08 | 57.1 |
| 1.5" dia | 1.7671 | 6.849 | 10.19 | 82.2 |
| 2" dia | 3.1416 | 12.177 | 18.12 | 146.1 |
| 2.5" dia | 4.9087 | 19.026 | 28.31 | 228.3 |
| 3" dia | 7.0686 | 27.398 | 40.77 | 328.8 |
| 4" dia | 12.5664 | 48.707 | 72.48 | 584.5 |
Formula: area = pi / 4 x d squared; weight = area x length x 0.323 lb/in3. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of copper round bar?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.323 lb per cubic inch for copper (110). For this shape the area is: area = pi / 4 x d squared. A foot of stock is 12 inches, so weight per foot is area x 12 x 0.323.
How does copper compare with steel by weight?
Copper is 14% heavier than carbon steel for the same size: 0.323 lb per cubic inch against 0.2836. The same bar or plate in copper weighs 1.14 times the steel figure.
Other copper shapes
Round bar in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.