A #44 drill measures 0.0860 inch (2.184 mm). The closest fractional drill is 3/32" (0.0938") and the closest metric drill is 2.2 mm (0.0866").
What are the #44 drill equivalents?
| Drill | System | Decimal (in) | mm | Difference (in) |
|---|---|---|---|---|
| #44 | number | 0.0860 | 2.184 | 0 |
| 2.2 mm | metric | 0.0866 | 2.200 | +0.0006 |
Drill sets that include this size
Number and letter sizes come in indexed sets; buy the set rather than single drills.
What speed should a #44 drill run?
| Material | RPM (HSS) | Feed (in/rev) |
|---|---|---|
| 6061-T6 aluminum | 8,883 | 0.0017 |
| 360 free-machining brass | 6,662 | 0.0015 |
| 1018 cold rolled steel | 3,553 | 0.0013 |
| 304 stainless steel | 1,777 | 0.0009 |
Starting points from conservative HSS drilling speeds. Small drills often call for more RPM than a benchtop drill press offers; run at the top speed and feed gently. Use cutting oil in steel and stainless, and clamp the work: never hold it by hand.
Cutting fluid for drilling
Frequently asked questions
What is a #44 drill in inches?
0.0860 inch, which is 2.184 mm. Number drills get smaller as the number rises, so the next number up is a smaller drill. If you do not have this exact size, 2.2 mm is within 0.0006 inch.
What tap uses a #44 drill?
No common UNC or UNF thread uses it as its standard 75% tap drill, but it often serves as an alternative drill for a slightly different percentage of thread, or as a clearance or pilot size. The tap drill chart lists every standard pairing.