Start 932 bearing bronze at 90 SFM with a HSS lathe tool bit: about 344 RPM on 1 inch stock. Rough at 0.0080 in/rev and about 0.05 inch depth of cut, finish at 0.003 in/rev and 0.005 inch.
What RPM and feed for 932 bearing bronze?
| Work diameter | Ideal RPM | RPM on a 2500 RPM mini lathe |
|---|---|---|
| 0.25" | 1,375 | 1,375 |
| 0.5" | 688 | 688 |
| 0.75" | 458 | 458 |
| 1" | 344 | 344 |
| 1.5" | 229 | 229 |
| 2" | 172 | 172 |
| 3" | 115 | 115 |
| 4" | 86 | 86 |
Feed: roughing about 0.0080 in/rev at 0.05 inch depth of cut; finishing about 0.003 in/rev at 0.005 inch. On a 7x mini lathe the power feed rates are fixed by the change gears, so pick the nearest.
Tools for cutting 932 bearing bronze
How does 932 bearing bronze machine?
SAE 660 (C932) bearing bronze is the usual stock for bushings. It machines cleanly into small broken chips. Like brass it can grab a drill, so a flatted drill lip helps, and it runs happily dry.
Why a HSS lathe tool bit?
Ground HSS tool bits are the classic mini lathe tool: they can be ground razor sharp with positive rake, which is exactly what a low-power lathe needs to cut without pushing the work away.
Adjust speeds with the RPM calculator and milling feeds with the feed rate calculator. The cutting speed chart compares every material.
Frequently asked questions
What SFM for 932 bearing bronze?
A starting surface speed of 90 SFM with HSS and 300 SFM with carbide, and 80 SFM for HSS drills. These are conservative for hobby machines; raise them in steps if the chips come off clean and the tool stays cool. 932 bearing bronze rates good for machinability.
What happens if my machine cannot reach the RPM?
Run at your top speed. Running below the ideal surface speed only makes the job slower; it does not damage the tool. For milling and drilling, keep the chip load per tooth or feed per revolution the same so the edge keeps cutting instead of rubbing, which lowers the feed in inches per minute in proportion.
Other tools in 932 bearing bronze
Other materials with a HSS lathe tool
- 6061-T6 aluminum
- 7075-T6 aluminum
- 360 free-machining brass
- 110 copper
- 12L14 leaded steel
- 1018 cold rolled steel
- 1045 medium carbon steel
- 4140 alloy steel (annealed)
- All