Mill 12L14 leaded steel with a HSS end mill at about 150 SFM: 1,146 RPM for a 1/2 inch cutter, 4 flutes, about 0.0030 inch per tooth.
What RPM and feed for 12L14 leaded steel?
| Cutter | Ideal RPM | Chip load (in/tooth) | Flutes | Feed at ideal RPM (IPM) | Feed if capped at 2500 RPM |
|---|---|---|---|---|---|
| 0.125" | 4,584 | 0.0008 | 4 | 13.8 | 7.5 |
| 0.1875" | 3,056 | 0.0011 | 4 | 13.8 | 11.3 |
| 0.25" | 2,292 | 0.0015 | 4 | 13.8 | 13.8 |
| 0.375" | 1,528 | 0.0023 | 4 | 13.8 | 13.8 |
| 0.5" | 1,146 | 0.0030 | 4 | 13.8 | 13.8 |
| 0.75" | 764 | 0.0045 | 4 | 13.8 | 13.8 |
Tools for cutting 12L14 leaded steel
How does 12L14 leaded steel machine?
12L14 is the easiest steel to turn on a mini lathe and gives the best finish for the least effort. It is not suitable for welding or heat treating, and the lead content means you should not breathe its fumes or smoke, so skip it for any part that will be welded.
Why a HSS end mill?
HSS end mills are the forgiving choice on a light hobby mill: they tolerate chatter and interrupted cuts that chip carbide, they are cheap to replace, and they cut well at the modest spindle speeds benchtop mills offer.
Adjust speeds with the RPM calculator and milling feeds with the feed rate calculator. The cutting speed chart compares every material.
Frequently asked questions
What SFM for 12L14 leaded steel?
A starting surface speed of 150 SFM with HSS and 500 SFM with carbide, and 110 SFM for HSS drills. These are conservative for hobby machines; raise them in steps if the chips come off clean and the tool stays cool. 12L14 leaded steel rates excellent (about 170% of 1212) for machinability.
What happens if my machine cannot reach the RPM?
Run at your top speed. Running below the ideal surface speed only makes the job slower; it does not damage the tool. For milling and drilling, keep the chip load per tooth or feed per revolution the same so the edge keeps cutting instead of rubbing, which lowers the feed in inches per minute in proportion.
Other tools in 12L14 leaded steel
Other materials with a HSS end mill
- 6061-T6 aluminum
- 7075-T6 aluminum
- 360 free-machining brass
- 932 bearing bronze
- 110 copper
- 1018 cold rolled steel
- 1045 medium carbon steel
- 4140 alloy steel (annealed)
- All