2" x 2" x 0.1875" aluminum angle weighs 0.836 lb per ft (1.24 kg per m). Weight = cross-section area x length x 0.0975 lb per cubic inch.
How much does aluminum angle weigh per foot?
| Size | Area (sq in) | lb per ft | kg per m | 12 ft length, lb |
|---|---|---|---|---|
| 1" x 1" x 0.125" | 0.2344 | 0.274 | 0.41 | 3.3 |
| 1.25" x 1.25" x 0.125" | 0.2969 | 0.347 | 0.52 | 4.2 |
| 1.5" x 1.5" x 0.125" | 0.3594 | 0.420 | 0.63 | 5.0 |
| 1.5" x 1.5" x 0.1875" | 0.5273 | 0.617 | 0.92 | 7.4 |
| 2" x 2" x 0.1875" | 0.7148 | 0.836 | 1.24 | 10.0 |
| 2" x 2" x 0.25" | 0.9375 | 1.097 | 1.63 | 13.2 |
| 3" x 3" x 0.25" | 1.4375 | 1.682 | 2.50 | 20.2 |
| 4" x 4" x 0.375" | 2.8594 | 3.345 | 4.98 | 40.1 |
Formula: area = thickness x (leg A + leg B minus thickness); weight = area x length x 0.0975 lb/in3. Corner radii are ignored, so real stock runs one to three percent lighter than the table. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of aluminum angle?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.0975 lb per cubic inch for aluminum (6061). For this shape the area is: area = thickness x (leg A + leg B minus thickness). A foot of stock is 12 inches, so weight per foot is area x 12 x 0.0975.
How does aluminum compare with steel by weight?
Aluminum is 66% lighter than carbon steel for the same size: 0.0975 lb per cubic inch against 0.2836. The same bar or plate in aluminum weighs 0.34 times the steel figure.
Other aluminum shapes
Angle in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.